Industrial Dust Extractor For PCB Cutting Machine, PCB Drilling and PCB Routing

Products Features: 

  • Able to work 24 hours continuously per day
  • Automatic filter cleaning system with adjustable pulse time interval
  • PTFE-membrane HEPA cartridge filters treat fine dust at 0.3 microns efficiently
  • The linkage interface design makes it possible to start and stop the equipment with other machines

Parameters of PT Series Industrial Dust Collector For PCB Cutting Machine

Peakvac PT series is an industrial dust collector with supporting automation equipment, 2.2kw/3kw industrial vortex fan,which can It works continuously for 24 hours. 
It can absorb large particles, a large amount of iron filings, solid mixture and a small amount of liquid or viscous substances, and can be fixed on large equipment as a fixed dust collection device.  Linkage interface design, can be linked with supporting equipment.

Description
Unit
PT200
PT300
Current type
Ph – V – Hz
3- 380 – 50 / 60
Power
kW / HP
 2.2 / 3
 3 / 4
Airflow
m³/h (l/s) / CFM
320 (89) / 188
 320 (89) / 188
Vacuum
kPa / inH2O
19 / 76
  26 / 104
Sound pressure level
dB(A)
66
67
Container capacity
l / gal
15 / 4
Filter area
cm2 / ft2
21600 / 23
Filter efficiency
μm
0.3
Filter type
 
2 HEPA filters
Filter cleaning system
 
Pulse jet cleaning (Compressed air requirement: 4-6 bar)
Inlet diameter
mm / in
40 | 50 / 1.57 | 1.97
Cable length
m / ft
7 / 23
Dimensions (L × W × H)
mm / in
530*500*1030 / 21*20*41

Features of PK Series Mobile Industrial Fume Extractor

  • The linkage interface design makes it possible to start and stop the equipment with other machines.
  • Able to work 24 hours continuously per day.
  • Reliable electric components improve overall safety and stability, with the function of phase sequence, overheating and overload protection.
  • Automatic filter cleaning system with adjustable pulse time interval.
  • PTFE-membrane HEPA cartridge filters treat fine dust at 0.3 microns efficiently. 
  • 2.0 mm thick sheet metal with excellent surface treatment.
  • Four universal wheels with brakes make the equipment easy to move and relocate.

Automactic Cleaning System

The automatic dust cleaning system can automatically adjust dust cleaning parameters, such as pulse width, pulse interval, etc., according to the actual situation, so as to achieve the best dust cleaning effect and improve dust cleaning efficiency.

High Efficiency Filter Catridge

Equipped with two PTFE membrane HEPA cartridge filters, which can effectively handle fine dust of 0.3 microns, and are equipped with a pulse automatic dust cleaning function. The filter cartridges are not easy to be clogged, and can efficiently handle dust and provide product quality.

Industrial Dust Collector Solution For PCB Cutting Machine

PCB cutting dust treatment
A V-cut machine introduces V-shaped cuts or grooves in sheet metal. During this process, a large amount of dust and granular metal debris will be generated. These dust and debris need to be sucked away in time, otherwise it will affect the quality of plate processing. Additionally, suspended dust particles can affect workers’ respiratory health.

 

Solution:
A suction hood is generally reserved above the cutter of the V-CUT machine, and a round tube with a diameter of 50-100mm is left above the suction hood for connecting the dust collector. We can choose our PT series dust collectors based on the number and diameter of the suction ports.

Applications

  1. Laser cutting industry
  2. Carving welding auto equippment matching
  3. Production line matching
  4. PCB cutting machine
  5. PCB drilling
  6. PCB routing

WARRANTY

Our goal is to ensure that our customers are 100% satisfied with the products they purchase, which is why our products are designed to deliver high quality standards and long-lasting performance.

As the original purchaser, we guarantee your industrial dust extractor to be free from material defects for a period of one years after original purchase. If such a defect occurs under normal use, we will repair or replace your product free of charge.

You don’t need to worry how to choose suitable industrial dust extractors. Peakvac have been in the industry for more than ten years, and we have enough experience to provide you with a one-stop comprehensive dust removal solution.

6 Tips for Easily Maintain Industrial Fume Extractor

  • Clean the filter regularly: The filter is an essential part of the fume extractor that captures the harmful particles from the air. Regular cleaning of the filter will ensure that it works efficiently. You can use a soft brush or vacuum to remove the dirt and debris from the filter.
  • Check the fan and motor: The fan and motor are the components that help in pulling the air through the filter. Check them regularly to ensure they are working correctly. If you notice any noise or vibration, it could be an indication that the fan or motor needs repair or replacement.
  • Inspect the power cord: Check the power cord regularly for any damage or wear and tear. Make sure it is not frayed or cut, and there are no exposed wires. If you notice any damage, replace the power cord immediately.
  • Keep the unit clean: Clean the exterior of the fume extractor regularly with a damp cloth to remove any dust or dirt. Make sure you do not use any abrasive cleaning agents that could damage the unit.
  • Store it properly: When not in use, store the fume extractor in a clean and dry place. Make sure it is covered to prevent dust and dirt from accumulating on the unit.
  • Follow the manufacturer’s instructions: Always follow the manufacturer’s instructions for maintaining the fume extractor. They may have specific guidelines for cleaning and maintenance that will help keep the unit in good working condition.

    By following these steps, you can ensure that your portable fume extractor works efficiently and lasts for a long time.

Cases of Peakvac Industrial Fume Extractor

Mobile industrial fume extractors are widely used in chemical, electronic, metal processing, tobacco, glass, pharmaceutical, food processing, clean rooms, hospitals and other industries and other places with dust and smoke pollution

Certificates Guarantee Quality

After many years of work, the company has successfully completed the GS.CE.CB.ROHS certification, BSCI Social Audit, ISO9001 quality Audit, and 14001 Environmental management system certification. SASO, SAA, and ETL test standards.

inudstrial dust collector certificates

Safety Packing We care

We provide economical and environmentally friendly cartons packing and safe wooden boxes packing. Our packaging can ensure the safety and reduce the possibility of damage during transportation.OEM packing also is avaliable.

industrial vacuum cleaner wooden box packing
industrial vacuum cleaner carton packing

About Peakvac.com

Peakvac was established in 2012. It is mainly engaged in wet and dry vacuum cleaner, commercial vacuum cleanerindustrial vacuum cleaner, heavy duty industrial vacuum cleaner, fume extractors.

Peakvac’s products are built to comply with major international standards, including European Standard as well as other relevant standards for each product type. With our machines, many excellent global partners are spreading it to South Korea, Japan, Southeast Asia, European countries, and North America.

Why Select Peakvac Industrial
Fume Extractor

Factory Directly

Equipped with injection molding workshop, professional assembly line, and product testing laboratory to control costs for your products

Tailored to your needs

Tell me your thoughts and requirements, and designers with more than ten years of experience can customize products for you, including appearance design, packaging design and functional design.

Fast Delivery

With 4 production lines, 200+ well-trained employees, and strictly in accordance with the 5s assembly process, each product will be fully checked before shipment to ensure fast delivery and meet quality standards.

10+ Years Exporting Experiences

In the past 10 years, our products have been exported to Europe, North America, South America, Southeast Asia, etc. We are honored to be the OEM supplier of Dewalt.

12 Months Warranty

100% full inspection of raw materials and accessories. We can guarantee 99.9% quality product rate. And can provide a 12 months warranty, no need to worry about product quality.

Fast response

Full services from pre-sale to after-sale. We not only pay attention to product quality, we care more about client services.No matter what the tough issues are, we guarantee your after-sales service 24/7.

Contact us Get Catalogue and Solution

Whatapp: + 86 181 1460 5696
Wechat: + 86 137 7326 5696
Email: info@peakvac.com
Ericwang@peakvac.com
MON-FRI 08:00 - 22:00,
SAT-SUN 08:00 - 24:00

Get An instant quote

Get catalogue now!