DJS Series Industrial Dust Collectors For Sale and Appplication for Airborne Dust

Products Features: 

  • Built-in pulse shock-blown dust injection system has low noise and more obvious effect
  • Easily set up pulse cleaning time interval according to different conditions
  • Filter material is polyester with 15 pcsPTFE coated, which can filter 99.9% dust at 0.3 micron
  • Pulse jet cleaning method for the filter makes machine to work continuously
  • International certification of UL & CE
Peakvac DJS series pulse back-blown cabinet industrial dust collector for sale, equipped with centrifugal fan, has large air volume, low noise, conforms to UL&CE international certification, and can work continuously for 24 hours. The built-in pulse shock-blown dust injection system has low noise and more obvious effect. It can set pulse cleaning time interval according to different working conditions, and can automatically and effectively clean the dust adhering to the filter. Maintain the service life of the filter and the lasting air flow of the machine.
djs industrial dust collector for sale

Parameters of Peakvac DJS Series Industrial Dust Collector For Sale

Description
Unit
DJS550
DJS750
Current type
Ph – V – Hz
3 – 380 – 50/60
Power
kW / HP
5.5 / 7.4
7.5 / 10
Airflow
m³/h / CFM
4000-5700 / 2354-3355
5000-7000 / 2943-4120
Vacuum
kPa / inH2O
2.1-2.9 / 8.4-11.6
2.5-3.3 / 10-13.3
Sound pressure level
dB(A)
72
74
Container capacity
l / gal
50 / 13.2
Filter area
m2 / ft2
72 / 775
Filter efficiency
μm
0.1-0.3
Filter type
 
15 HEPA filters
Filter cleaning system
 
Automatic Pulse Jet
Explosion-proof Configuration
 
No (customizable if required)
Switch control mode
 
Local + Remote
Inlet diameter
mm / in
150|500 / 5.9|19.7
Cable length
m / ft
8 / 26.2
Dimensions (L × W × H)
mm
1280*1200*2600

Features of DJS Series Industrial Dust Collectors

  • Centrifugal fan has the advantages of large air volume, low noise, stable performance, etc. The cabinet adopts modular design, and the machine can be customized according to customer’s demand for power, air volume, suction, suction and pipe diameter.
  • The equipment is equipped with intelligent control interface. There are two modes of operation, local control and remote control. The remote control mode can detect the operation of the equipment remotely and can also enter the system to set up the rotary wing back-blowing system. The operation is flexible.
  • According to the customer’s on-site working conditions, the suction diameter and quantity are designed, and the fan power suitable for the working conditions is calculated.
  • Built-in rotary wing back-blowing soot cleaning system, lower noise, rotary wing back-blowing system can effectively self-cleaning filter to ensure the normal operation of the machine, according to different working conditions, pulse cleaning time interval can be set;
  • 15pcs high-precision cylinder filters with 4.8M2 filtration area have a maximum total filtration area of 342 M2 and a filtration accuracy of 0.3um.
  • When used in explosion-proof places, the whole machine can be made into explosion-proof type, and the machine can be equipped with explosion discs and flameproof valves.
  • Built-in air duct can effectively reduce the load of the filter.
  • Manual air pressure regulating valve can effectively filter impurities in compressed air and ensure the normal operation of pulse system.
  • Separate dust collection drawer, more convenient to dump garbage, can meet long-term work needs.

Applications of AJS Series Industrial Dust Collector

  • For machinery manufacturing
  • For metal process
  • For grinding
  • For electronics
  • For ceramics
  • For pringting
  • For aluminum and PVC, glass industry
  • For wood, paper industry and other processing places
  • Used in line with production line or production equipment

Application Video of DJS Industrial Dust Collector

Suitable for the industries of grinding, cutting, mixing, sandblasting , ceramics, paper, steel, food, plastics, wood processing, etc.

How to Choose Your Industrial Dust Collector?

Choosing an industrial dust collector can be a complex process as it depends on a variety of factors such as the type of application, the size of the facility, the type and quantity of dust being produced, and the specific needs of the operation. Here are some general steps to follow when choosing an industrial dust collector

Assess Your Needs

Identify the specific requirements for your application, such as the type of dust being produced, the amount of dust being generated, and the required air flow rate.

Determine the Type of Dust Collector

There are several types of industrial dust collectors, including baghouses, cartridge collectors, cyclone separators, electrostatic precipitators, and wet scrubbers. Each type has its own advantages and disadvantages, so you should choose the one that is best suited for your specific application.

Evaluate the Dust Collector's Efficiency

Look for a dust collector that has a high filtration efficiency to ensure that the dust is effectively captured and removed from the air. The efficiency of a dust collector is measured by its MERV (Minimum Efficiency Reporting Value) rating, which indicates how small of a particle the filter can capture.

Consider the Size and Air Flow

Choose a dust collector that has the appropriate size and air flow rate for your application. The size of the dust collector will depend on the amount of dust being generated, and the air flow rate will depend on the type of application and the size of the facility.

Evaluate Maintenance Requirements

Look for a dust collector that is easy to maintain and has accessible filters for cleaning or replacement. The maintenance requirements of the dust collector should fit within the schedule and resources of your facility.

Consult with Experts

Consult with experts in the field to ensure that you are choosing the most appropriate dust collector for your application. This could include dust collector manufacturers, industrial hygienists, or air quality specialists.

You don’t need to worry how to choose suitable dust collectors. Peakvac have been in the industry for more than ten years, and we have enough experience to provide you with a one-stop comprehensive dust removal solution.

Certificates Guarantee Quality

After many years of work, the company has successfully completed the GS.CE.CB.ROHS certification, BSCI Social Audit, ISO9001 quality Audit, and 14001 Environmental management system certification. SASO, SAA, and ETL test standards.

inudstrial dust collector certificates

Safety Packing We care

We provide economical and environmentally friendly cartons packing and safe wooden boxes packing. Our packaging can ensure the safety and reduce the possibility of damage during transportation.OEM packing also is avaliable.

industrial vacuum cleaner wooden box packing
industrial vacuum cleaner carton packing

About Peakvac.com

Peakvac was established in 2012. It is mainly engaged in wet and dry vacuum cleaner, commercial vacuum cleanerindustrial vacuum cleaner, heavy duty industrial vacuum cleaner, fume extractors.

Peakvac’s products are built to comply with major international standards, including European Standard as well as other relevant standards for each product type. With our machines, many excellent global partners are spreading it to South Korea, Japan, Southeast Asia, European countries, and North America.

Why Select Peakvac Industrial Dust Collectors

Factory Directly

Equipped with injection molding workshop, professional assembly line, and product testing laboratory to control costs for your products

Tailored to your needs

Tell me your thoughts and requirements, and designers with more than ten years of experience can customize products for you, including appearance design, packaging design and functional design.

Fast Delivery

With 4 production lines, 200+ well-trained employees, and strictly in accordance with the 5s assembly process, each product will be fully checked before shipment to ensure fast delivery and meet quality standards.

10+ Years Exporting Experiences

In the past 10 years, our products have been exported to Europe, North America, South America, Southeast Asia, etc. We are honored to be the OEM supplier of Dewalt.

12 Months Warranty

100% full inspection of raw materials and accessories. We can guarantee 99.9% quality product rate. And can provide a 12 months warranty, no need to worry about product quality.

Fast response

Full services from pre-sale to after-sale. We not only pay attention to product quality, we care more about client services.No matter what the tough issues are, we guarantee your after-sales service 24/7.

Contact us Get Catalogue and Solution

Whatapp: + 86 181 1460 5696
Wechat: + 86 137 7326 5696
Email: info@peakvac.com
Ericwang@peakvac.com
MON-FRI 08:00 - 22:00,
SAT-SUN 08:00 - 24:00

Get An instant quote

Get catalogue now!